The GE Fanuc IC693MDL634 module is an input module with a voltage rating of 24 Volts DC. It is manufactured as part of the Series 90-30
product line of Programmable Logic Controllers or PLCs manufactured by the GE Intelligent Platforms/GE Fanuc Company. This module
features one group of 8 input points as well as a single common power input terminal. The configuration of the GE Fanuc IC693MDL634
module allows for the use of both negative and positive logic characteristics. Some of these input characteristics are best used for a variety
of input devices supplied by the users, for instance, pushbuttons and limit switches. When current goes through the input points, the input
status table results in a logic level of 1. The power used to run field devices can be supplied by the operators, but an isolated output power
of +24 Volts DC can work as a source of power for limited DC inputs.
The GE Fanuc IC693MDL634 input module comes with an input voltage range from 0 to 30 Volts DC, and 7 milliamps of average input current
rating at the rated voltage. This module also features an on-state voltage range of 11.5 to 30 Volts DC, with a 0 to 5 Volts DC off-state voltage
range. It comes with an on-state current of 3.2 milliamps at a minimum and an off-state current of 1.1 milliamps at maximum. The
IC693MDL634 module features LED light indicators that show the "ON" and "OFF" status for each of the 8 input points. There is an
insert that separates the inside and outside surfaces of the GE Fanuc IC693MDL634 module’s hinged door and it can be identified by
the blue-colored left edge that signals when the module has low voltage.
